Hot Construction & Repair How-Tos
How To: Install Laminate Flooring on Stairs
Installing Laminate Flooring on Stairs Laminate flooring can be installed on a flight of stairs, and this process can also be used when installing laminate on a floor and having to drop down a step to a sunken room.
How To: Remove a Shark Bite Fitting Without a Special Tool - Adjustable Wrench Trick
Here's a fast easy way to remove and disconnect your Shark Bite quick connect fitting, without a special tool to do it. We'll show you a awesome little trick using an adjustable wrench. This will work an all different size Shark Bite fittings.
How To: Build and install a cheap dumbwaiter in your home
Home improvement expert Danny Lipford shows how to build and install a cheap dumbwaiter in your home in this video tutorial.
How to Build a Shed, Part 9: Building & Installing Gable Ladders (Rakes)
Using ladders (Rakes) to build your gable overhangs on the shed is one of the fastest and easiest ways to do this. Henry shows you how to layout, build and install the ladders on our shed.
How To: Attach Timber to Concrete Using Concrete Anchors
How to install concrete anchors.How to attach timber / wood to concrete or any other SOLID masonry surface using masonry anchors / DynaBolts. DynaBolts (that's the name for this particular anchor in Australia. They are know by other names in other countries) are the ideal anchor for attaching almost anything to solid masonry such as concrete. This video will look at attaching timber to a concrete floor.
How To: Lay ceramic tile with drywall spackle
Tree Climbing Man demonstrates how to lay ceramic tile with drywall spackle. You don't need to rip up your existing floor and put down plywood or a sub floor to lay down a new floor. You can put ceramic tile right over existing linoleum with less work, less heartache and less problems. First, spackle the back of each tile and lay it down. You can also use a stapler and tape to fix problem areas. You don't need to go crazy with the adhesive. Spend your money on quality tile. You can use clay f...
How To: Build a retaining wall with an outside 90 degree wall
This video tutorial shows you how to build a retaining wall system with an outside 90 degree wall. This how-to video is a must-watch for everyone in the building and construction business.
How To: Work on your roof without falling off
In this roofing video Bob Schmidt shows you how to use the foam padding from a sofa cushion to say secure and not fall while doing roof repairs.
How To: Build an industrial size BBQ smoker from an old refrigerator
You can take an old, stainless steel refrigerator and turn it into a vertical smoker. Weld steel plates to make a fire box with a door and a removable ash tray, then reconstruct the frame to make yourself a new addition to your barbecue pit!
How To: Lay Straight Tile with a Crooked Wall
Tiling always looks so easy when you see it done on a straight wall! But how do you do it with a crooked wall? Use a Measureright Pro to get the angle right. So if you've tiled from a straight right angle and you're just reaching the 'odd' shaped spaces between your last row of tiles and your crooked wall, you can use the tool to mark your final row of tiles so that when you cut them, they will fit right into the irregular shaped spaces between your final row of tiles and the slanting wall. T...
How To: Cut Perspex or acrylic sheet with a circular or jigsaw
Wondering how to cut Perspex (or acrylic glass) easily? When cutting Perspex at home, you're more or less limited to using circular saws and jigsaws. For cutting straight lines, the circular law works best; for curvy lines, you'll want to use your jigsaw. For more information, including step-by-step instructions on cutting your own acrylic sheet, watch this DIY home tutorial.
How To: Lay Masonry Blocks and Bricks
Build a concrete "footer".
HowTo: Build an Air-Powered Star Trek Sliding Door
Live in the future (à la Star Trek, circa 1966) with uiproductions' pneumatic air-powered sliding door:
How To: Rewire a fuse from an older style consumer unit
ultimatehandyman shows you how to Rewire a fuse from an older style consumer unit. What you need: fuse from an older style consumer unit, a tester/screwdriver, fuse wire of right thickness1. Use a tester to determine whether your fuse is in working condition or not. Once you are sure it is not working unscrew the screws partially which are found on both ends. 2. Unwind the old fuse wire from the screws and remove. Take the fuse wire that is of same rating as the one you just removed. 3. Inser...
How To: Hold small nails when hammering
This video shows you how to hold small nails without hitting you fingers with a hammer. Get a piece of paper and push the nail through the paper. Position the nail where you want it and begin hammering it in. Before the nail is totally in, remove the paper and continuing the hammering. You can cut a little slit into a piece of cardboard putting the small nail into the slit before hammering. You can also put the small nail between the teeth in a comb before hammering.
How To: Install a deadbolt lock with Lowe's
This video from Lowe's will show you how to install a deadbolt lock in just a few easy steps. You can install a deadbolt lock on almost any exterior door, including those made from wood or steel. Deadbolt locks come in several types including the conventional ones requiring a key or the newer ones that have keypads. Whichever type you choose, the principles of installation are the same. This video will show how to a drill in your door and chisel out material in your door jam. Once this is don...
How To: Paint interior trim and molding
Before you paint the walls it is important to paint the trim first. A painting pad is a very useful tool for painting along the edge where the ceiling meets the wall. It has guide wheels on it and will roll right along as you paint the trim. Next you will want to paint your woodwork including your baseboards and trim. When you go to roll the wall first take some painters tape and run it along the top of the baseboard to keep the specks that fly off the roller from getting on the baseboards. U...
How to Build a Shed, Part 11: Installing Fascia Boards & Soffit Materials
The fascia boards and soffit material installation is very important. This is the finishing part of the shed. Henry shows you how to do this in great detail and get perfect results. In this video he shows you how to use his exclusive jig to make it easy to install long trim without any help!
How To: Adjust the Alignment of Cabinet Doors
Poor alignment of cabinet doors will cause a kitchen to look run-down and may be embarrassing to the homeowner. Luckily, with a single screw driver and a little ambition, the door alignment can look brand new.
How To: Build a Rustic Wine Rack from Reclaimed Pallet Wood
This is how to build a wine rack out of pallet wood. I was tossing around some wine rack ideas and decided that pallet wood, or reclaimed wood, is the perfect choice for a rustic wine rack. All you need for this project is an old pallet (for me a hardwood one is my choice). A pallet that has seen some wear is preferable so as to achieve that rustic look.
How To: Install an inside corner paper ceiling patch
Video Joe Knows demonstrates how to install an inside corner ceiling patch when installing drywall. First, give the paper tape a definitive crease. Then, wipe quick set on the ceiling and the wall. Make sure you get enough material behind the paper tape. Have more quick set on than you need because you can wipe off the excess. Build it up on the edges using a three or four inch knife. Next, apply the tape by pushing it into the corners of the desired area. Finally, wipe off the excess quick s...
How To: Tighten radiator valves
In this video you will learn how to tighten radiator valves using a spanner and water pump pliers. If you find that your radiator valves are leaking, follow these simple steps to remedy the situation: If you take a look at your lock shield valve, you may see signs that it has been leaking. Grip the valve with a pair of water pump pliers. This will prevent you from breaking the copper pipe. Tighten in a clockwise direction. Feel with your fingers to make sure there are no more leaks.
How To: Change Replace Freezer Light Bulb and Cover Kenmore Refrigerator
This video will show you how to remove the freezer light bulb cover in your Kenmore refrigerator. It's pretty easy to do, but not breaking the plastic light cover can be tricky.
How To: Join two pieces of wood
This video tutorial shows you how to join two pieces of wood. What you'll need:
How To: Install post and dowel fencing
My how-to on Post and Dowel Fencing. My buddy Sven and I, with the help of landowner Rex, installing a massive post & dowel Fence. You need a level, post hill driller, rock bar, and stakes. There are terminator, corner and line posts that have holes specifically for its position in the fence. It's like Lincoln logs that snap together. Lengths of the post vary, but you want 1/3 of the post underground. This is great for lining your property or farm.
How To: Install a window in a metal frame
A good way to install a window in a metal frame construction is to use some light gauge angle and screw it onto the sides of the window leaving a 10mm space for plaster. A flat head, self tapping screw is used to fix the window to the frame. Watch this video tutorial for a demonstration on how to install a window in a metal frame.
How To: Build an Awesome Grind Box!
How to build a really easy, but AWESOME Grind Box.! A grind box, or a skate box is a must for any skater. The grind box in this video is not only very easy to build but it can be made in under a day and with minimal tools. This grind box also has wheels that makes it incredibly easy for the kids to move around. The coping is galvanized steel with a slightly rounded formed edge. This makes for an ultra smooth grind! The skate surface is thick plywood, which makes for a very solid and tough gri...
How To: Add a door In an exterior brick wall
If you've got a brick house and are looking to install a door in the brick, this how to will get you there. Be prepared, it's a big job and you'll need to be comfortable wielding several power tools. Are you ready to take the challenge?
How To: Install a T-Mold Transition Between Laminate & Ceramic Tile
Installing a T Mold Transition Between Laminate and Ceramic Tile There are several different types of laminate transitions that you may need when installing laminate flooring. Each one is used specifically for where the laminate flooring ends, such as where the laminate stops at ceramic tile. Other transitions are used where the laminate ends at carpet, vinyl flooring, a threshold or a step down such as a sunken living room or stairs.
How To: Build a shadowbox style privacy fence
The video begins with a finished fence being shown as an example of what your final product should look like. The first step is to lay out straight lines with string to create the outline of fence parameter. To set the first post you must dig a five inch hole in the ground which the post is placed in. The post will be set along the string line spaced out about four inches evenly along the parameter. the holes must be filled in with rock or cement to set them securely. You must then nail board...
How To: Remove a threaded stud from a threaded hole
Ultimate Handyman demonstrates how to remove a threaded stud from a threaded hole. You will often find threaded studs when you are doing car repair. First, remove the nut from the stud. Then, spray it with lubricant. Next, screw the nut back on the stud. Screw another nut on top of the first nut. Grip the bottom nut with a wrench while tightening the top nut. Grip the bottom nut and turn it in a counter clockwise direction. The stud should then pull out of the threaded hole. It may be difficu...
How To: Cut the perfect inside corner with a miter saw
This video, from Superior Building Supplies, demonstrates the proper technique for cutting the inside corners of crown molding. The presenter suggests downloading several diagrams from the Superior Building Supplies website. These diagrams show the correct position of the miter for several different cuts. When using a miter saw think of the fence as the ceiling and the table as the wall. Cuts for inside corners will always be made using 45 degree angles on your miter saw. Using these techniqu...
How To: Install crown molding in a rectangular room
Why pay a contractor to do projects that, with a little effort and perseverance, you can do yourself? In this video tutorial, you'll learn how install crown molding in a rectangular room by coping your inside corners. For a step-by-step look at the crown molding installation process for a rectangular room, take a look at this DIY how-to.
How To: Build a retaining wall with an inside 90 degree wall
This video tutorial shows you how to build a retaining wall system with another wall inside it at a 90 degree angle. This video is a must-watch for eveyone in the construction business.
How To: Use cut nails to drive through wood and concrete
Tim Carter, of Ask the Builder, demonstrates how to drive a cut nail through a 2x4 piece of wood, and into a concrete wall. This will help save you time and money in your house repair projects.
How To: Install a Timber Floor
G'day Knuckleheads. In this Owner Builder Episode we look at laying the timber floor. You'll see in this video the team showing you how to lay a timber / wooden floor. The timber or wood l used for the floor was a species of timber called Blackbutt. It's a solid 19mm x 130mm board which is very hardy and should stand up to a fair bit of abuse…which it will get at my place :-) Timber floors really give a warmth to your property and are well worth the effort.
How To: Mark Out a Stud Wall
G'da,y Knuckleheads, Uncle Knackers here. In this Episode, we look at marking the wall studs. Making a stud wall is pretty straight forward but you just have to know a few basics first. This stud wall framing video looks at a few basic principles that will hopefully set you up to make your first stud wall frame. Check it out!
How To: Make a Floating Shelf (Awesome Pallet Wood Project)
This rustic floating shelf project is one of the easiest pallet jobs that l have ever done. Floating shelves look great as there aren't any shelving brackets visible, which makes the whole look very streamlined. My floating bookshelf also has the added feature of movable bookends with a handmade wooden nut!
How To: Replace Kitchen Sink Faucet with a New One
Learn how to replace your old kitchen sink faucet with a new one. This video will show you how easy it is to do, and the steps you need to take to perform the job successfully. We also add in a new dish and glass sprayer.Home repairs.
How To: How Fix a Broken Handle on Your Bathroom Toilet
Learn how to remove, replace or fix a broken flush handle or lever on your bathroom toilet. This quick video will get you back in business in no time!